2+1 Steel Toilet Cabin 12ft x 9ft – Ablution Block

This 2+1 steel toilet cabin puts two male cubicles with urinals and a single female toilet under one 3.66 m x 2.7 m roof, each side entered through its own deadlocking steel door. It is the amenities unit for workplaces that need something better than a hired portable loo but are not ready to build.

There are no windows at all. Ventilation is handled entirely by fitted extractor fans, which does two useful things: it gives complete privacy, and it removes the easiest way into a cabin left on an open site over a long weekend.

What is fitted inside

• Pans, basins, urinals and water heaters
• Sealed vinyl floor and wipe-clean wall boards
• Insulated walls and ceiling
• Fluorescent strip lighting and two tubular heaters
• Extractor fans in each compartment

Connections and siting

It stands on corner posts, so no jacking legs or hire stand are needed – just four level, load-bearing points. A licensed plumber connects water and waste, either to sewer or to a matching sit-on holding tank where no sewer exists; a licensed electrician terminates power to AS/NZS 3000.

Approvals

Councils generally treat a plumbed amenities block as building work whether or not the structure is relocatable, so start that conversation early. Our council approval guide covers what the process normally involves in each state. Related units, including the matching waste tanks, are listed under toilet and shower blocks.

Specifications