2024 Griffin 7ft x 16ft Telescopic Tipper Trailer – 6.4t with Ramps

A three-stage telescopic lift is the difference between a dump body that empties and one that half-empties. Scissor lifts run out of angle with a sticky load; a telescopic ram keeps pushing the front of the body up until everything slides. On wet clay, mulch or road base, that is not a small thing.

This Griffin GT-716/TELE pairs it with a two-way combination spreader and barn gate, so you can tip a heap or trickle a spread from the same trailer.

Build details

• 10 gauge smooth steel walls and floor with front and rear gussets sized for wall extensions
• Five 5,000 lb D-rings welded into the floor
• 2,032 mm C-channel fender-mounted ramps
• 12 V DC hydraulic pump, power up and power down, with a deep cycle marine battery
• Control box with front access, 3-piece plug-and-play wiring harness
• Tandem EZ lube axles with galvanised components on equalised leaf springs
• Tarp kit mounting brackets fitted, 406 mm radial tyres, high gloss black powder coat

Ratings

Gross 14,000 lb (about 6,350 kg), tare 4,855 lb (about 2,202 kg), rated payload 9,145 lb (about 4,148 kg). Model GT-716/TELE, black, new.

Australian registration

These are converted US manufacturer figures, offered for comparison only. No ADR compliance, ATM rating or roadworthiness is claimed – your state or territory road authority handles approval and registration of imported trailers, and that is the first call to make. The full range is under container chassis and trailers, with covered alternatives under enclosed trailers.